As the time goes, so the work grows...
Here I am scribbling with my Bible open at the same time, as context is very important in a verse placement and emphasis.
Here the layout at the top section completely changes in this step as you see. In this third and fourth pictures below it has changed on the tracing paper again, in small way (
will let you work out how? :D). Used a calligraphy texta to do the Gothic text and used different sized pens. I did cut and past pieces on the rough sheet above - ie bits not suitable were cut out and others add
ed.
Stage 4: Transfer to the tracing paper after the layout is sorted on stage 3.
Primarily, this is because the decoration can take some fiddling, and then the good paper would be messed with drawing, erasing, etc. I have to constantly change lettering etc. I redid one part of the top decoration four times, plus three of the lines were out by 1-3mm.
Secondly if someone asks me to do it again as another order, I have it to this stage already to lift out of my file. Saves a lot of time and it is not unusual to be asked again as have a portfolio, and give a discount for ones done before, because of the huge amount of time and effort saved.
Stage 5: Once it is on the tracing paper it is transferred to the actual sheet of paper- I always use very good paper for many reasons. You will see later it has to be very forgiving as it is asked to take a lot! The 100% rag sheet was over $10AUD for the single sheet, which shocks some folks.As you see by these photos the setsquares are put it good use as must make sure all the angles are accurate and these are pencilled in lightly and left there until the inking in stage. Even doing this I find I have mistakes which drive me batty. I hate those bits whenever I look at the piece of work - but it is handmade and so not perfect.
Stage 6: Here we have work transferred then inked in and so all the really hard work as far as I am concerned in many ways is done at this stage. I think the biggest struggle in a work is getting the layout even and correct! The execution though still has its pains and stress as you see by the smudge below.
I have explained in another post
(see here) about these most amazing Pentel Hyper Erasers - so see if you can buy yourself one.This is when you are very grateful God answers your cries for help and uses the extra good paper and the Hyperaser to do the trick!
I copy each text about 5 to 6 times depending on method. First onto tracing paper, then trace onto sheet. Next it is pencilled in and then inked in… I am careful not to rush this step although it is tempting! Then paint (or colour if the other style with Caran D’Ache pencils) and re-ink again…
Stage 7:
Laying down the colours - the colours are laid on and blended. A palette is used (
see here for my desk as I work) of card with gouache and blend light to dark as shown. I start at either end of a single letter and work up or down. Gouache blends beautifully!
These are the colours from the Old Testament Tabernacle - and were requested by the person. I often use them. The colours are:
Blue - speaks of the Holy Spirit, Who if we allow Him works so mightily in our lives.
Crimson (scarlet) - speaks of the Son of God, the LORD Jesus Christ, Whose blood was shed to purchase salvation for all believing in His salvation work by faith.
Purple - Speaks of the Heavenly Father and the holiness of God - our Father Who constantly watches over those who are His children.
Gold - speaks of the Deity of God - so here the Trinity of the Lord God is pictured in the colours laid down by God to Moses over 4000BC (
see Exodus 28, etc), well before the Trinity was clearly revealed in the New Testament.
Stage 8: The gold leaf section is built up. The gold is done with a glue size, and layers (sometimes up to ten) are built up. Gold leaf is added right at the end when it is at the right level. I use transfer gold leaf in 23 carat and this very easy to use and is my favourite!
This above is the final layering of the gold leaf glue size ( which is a mixture of PVA glue, water and tiny bit of gouache). This stage is very different if doing flat gold leaf and then I use a commercial gilding size as done here on this post.
Adding the gold leaf transfer - it is rubbed on over the transfer paper, gently using finger on the back of the sheet to make sure you cover all the surface. Sometimes when humidity is very low, it dries the size too hard to let it adhere. It is moistened by blowing on it - some folks use a special tube to blow through but I dont bother, rather like the burnishing tool. I have very soft brush with which I buff it - you dont need anything else for this particular type of of gold leaf. I paid heaps for a burnisher which is never used.
I meant to explain about the small flower when doing layout. It is magnified here with my clip on magnifier (bought at Aldi's, which I use all the time these days) - this flower is to indicate a part of the verse has been left out ie to indicate a minor break in the passage.
Stage 8: Final stage - Re-inking and touching up
Hurray!! do I love this bit.
I was asked to put a close up of "The Lord". For those who asked, yes, this is my original design- I redid the bit next to the "The" about three or four times.
Balance is very important.
I would never expend the fifty plus hours on anything but the Word of God - it is far too draining, and as some know I was sick half way through doing this piece.
However for God's precious Word every bit is worth it and
to God be all the glory alone - it is His handiwork. I am merely the servant.
If you have lasted the full post I congratulate you, and thank you. This post so long and detailed has been a battle too! to get blogger to do it!
May God bless your day wherever you may be.
May this precious Word bless your heart in
all its beauty and treasure. His precious Word is
the place where we find comfort and help in time of need, and much more indeed!
Shaz in Oz.x
PS Forgot to link over to this new blog hop I have found - called Scripture Thursday at
Little Birdie Blessings see it here and do join in too!
.jpg)
